Rear Flip Down Swivel Caster
Rear Flip Down Swivel Caster allows you to create
the perfect circles and arcs. This accessory easily lowers when needed
to paint circles and arcs, then locks in the upright position for
painting straight lines.
- Fits on all 4250 Airless, 4400 Airless, 4600 Airless, all EcoLiner and RollMaster 5000 machines
- Proudly Made in the USA
- 12 Month Warranty
MOUNTING
Remove the items from the package. Loosen the screws in the split
collars of the mount (#2) and remove the top halves. Place the caster
assembly (#1) at rear of the machine. Pull the release pin (#3) and
rotate the caster upward to allow the caster mount halves of the collars
around the bottom cross bar of the handle. (The caster mount will rest
against rear of handle on both sides. See picture above for location).
Attach the top halves of the collars (#2) and then center the caster and
re-tighten the screws.
OPERATING
Hold the caster and pull the release pin (#3) to lower the caster. Raise
the back of the machine and the caster will lock into place. When
finished using the caster, lift the rear of machine and pull the release
pin (#3) to lower the machine. Push the caster up with your foot until
the pin locks it in upper hole.
Any questions please call 323-582-6461 or email us at info@HPRubberStamp.com