AD-2003 Enthone - Hysol Retarder - Gallon
Retarder for Enthone 50 series CAT-L-INK
Most epoxy inks can be modified with thinners, retarders, flattening paste, reducers, or clear bases. Before adding any of these products, please refer to the specific ink technical data sheet for additive proportion instructions.
SCREEN PRINTING OR USING 2 PART EPOXY PASTE INKS
THINNING:
If thinning is required, add small amounts of AD-2001 thinner. Additions
should be made after the induction period. Thinner additions extend the
pot life. AD-2001 Thinner for nominal adjustments in viscosity. Incrementally add 3-6% by weight.
SPRAYING:
Following the induction period, thin with AD2002 or a blend of 80% PM
glycol ether and 20% methyl isobutyl ketone at 25-40% by volume,
depending on air pressure and orifice of spray unit. Thinner additions
will extend the pot life considerably. AD2002 Thinner for spray applications. Add 25-40% by volume.
RETARDING:
Small amounts of AD2003 or carbitol acetate are recommended. Additions
should only be made after the induction period has been observed. AD-2003 Retarder to extend open time. Incrementally add 3-6% by weight.
REMOVAL: Enthone
SC1710 screen cleaner, AD-2003 or any lacquer wash will effectively
clean stamps, screens, and equipment before the ink cures.
THIS IS CONSIDERED A HAZARDOUS PRODUCT AND CAN ONLY SHIP GROUND
Any questions call us at 323-582-6461 or email info@HPRubberStamp.com