73X Industrial Ink - Pint
You choose the color below
Adherence: Even though it is a non-etching ink the
adherence qualities are good on clean bare metals of all kinds, glass,
most plastics, and rubber compounds with the exception of silicone.
Prior to testing adherence, we recommend an air-dry period of 24 hours.
An application of heat (when the surface temperature reaches 250˚F) for
30-35 minutes will give even better adherence and greater solvent
resistance.
Resistance: The ink is resistant to water, salt
spray, gasoline, lubrication oils, alipathics, hydrocarbons, many
alkaline and detergent compounds, as well as some degreasing solvents.
Exposure to temperatures up to 350˚F does not appreciably affect
adherence, although the shade of some colors may change slightly.
Corrosion: Since the ink is not compounded with
toxic or harmful acids, it is non-corrosive on aluminum alloys,
magnesium, stainless, titanium, and many of the exotic space metals.
Performance Specifications: When properly applied,
meets or exceeds the performance requirements of Federal Specification
TT-I-1795 now cancelled and superseded by G.S.A. Spec. AA-208 Type I
Rev. A. Also meets Boeing spec HMS 8-1169 TY 1.
Tariff code; 3215.11.0060
Available Colors: Black, Blue, Brown, Green, Red, White.
Questions or comments call us at 323-582-6461 or email us at info@HPRubberStamp.com