MacDermid Enthone M-Series Epoxy Inks
M-Series inks are permanent, two component, epoxy-based marking inks. They may be used with a selection of catalysts which cure at elevated and/or room temperatures. When properly applied and cured, M-Series inks have excellent adhesion to glass, metal and thermosetting plastics. They have excellent chemical and thermal resistance properties.
Available Sizes: Bi-Paks (1/3 oz.), 6 Ounce Kits, 1 Quart Kits.
MacDermid Enthone 50-Series Cat-L-Epoxy Ink
50-Series Cat-L-Inks are permanent, two component, epoxy-based screen printing inks. They may be used with a selection of catalysts which cure at elevated and/or room temperatures. When properly applied and cured, Cat-LInks have excellent adhesion to photoimageable, thermal and UV solder masks, glass, metal and plastic. They have excellent chemical and thermal resistance properties.
Available Sizes: 1 Quart and 1 Gallon Containers
Catalyst is sold separately.; 20/A, 45, 77, 9, B13/28, B3, No. 5.
Mixing Ink With Catalyst: Add 1 part catalyst to 6 parts ink by weight.
Characteristics: Superior adhesion to epoxy, glass, metal or other nonporous surfaces designed for rubber stamping or offset printing. Excellent resistance to abrasion, MEK, alcohol, TCE, flux removers, salt, acid and alkali solutions when properly cured.
ACCESSORY PRODUCTS
AD2001 Thinner for nominal adjustments in viscosity. Incrementally add 3-6% by weight.
AD2002 Thinner for spray applications. Add 25-40% by volume.
AD2003 Retarder to extend open time. Incrementally add 3-6% by weight.
AD3002 Flow agent to eliminate crawling, pin-holing and bubbling. Incrementally add 2-4% by weight. Mix gently to avoid over mixing.
Questions or comments call us at 323-582-6461 or email us at info@HPRubberStamp.com